Speedtech 70-81 Camaro Track Time Suspension User Manual

1 | P a g e May 14, 2014 ‘70-81 Camaro Track Time Suspension Installation Instructions

10 | P a g e Terms and Conditions of Sale 1. Effective January, 2008, supersedes all previous policy statements. Policies are subject to change wit

11 | P a g e Speedtech Performance 1-435-628-4300 www.speedtechperformance.com Copyright Speedtech Per

12 | P a g e This page intentionally left blank

2 | P a g e The following instructions are intended for professional installers and are guidelines only. Speedtech Performance assumes NO responsib

3 | P a g e Installation Hardware (additional to the hardware found with individual parts)  (4) Upper Control Arm bolts ½ x 2 ¼ NF

4 | P a g e 1. Before any removal of the old sub frame begins, disconnect and remove the battery, but you knew that. 2. The vehicle should be on

5 | P a g e 5. You will need to modify the mounting holes for the upper control arms to achieve better camber gain and lower the roll center. First

6 | P a g e Spread the mount apart as needed by tightening the nuts against the frame.

7 | P a g e 9. Install the new steering box in the frame and the pitman arm on the box. 10. Install the idler arm relocation bracket on the fra

8 | P a g e 11. Assemble the inner tie rod ends, adjuster sleeves and outer tie rod ends. **Note: There are two different part #s for the inner t

9 | P a g e 13. Do not drive the vehicle, have it towed to a competent professional alignment shop to have an alignment performed. Note: Use these